Standard Stock List

Note we are a smaller workshop with 3 staff, not a huge steel distributor. However we do have a good range of metal in stock to offer competitive lead times on laser cutting and bending. Within our racking, we keep stock the following materials/sizes. Amount stocked is based on demand. Suggest making contact to check availability before coming.

Mild Steel G250 (0.6x1.2 and 0.75x1.5m low stock - check first):
1.2mm cold rolled 1.2x2.4m
1.6mm 0.6x1.2, 0.75x1.5, 1.2x2.4m
2mm 0.6x1.2, 0.75x1.5, 1.2x2.4m, 1.2x3m, 1.5x2.4m, 1.5x3m
3mm 0.6x1.2, 0.75x1.5, 1.2x2.4m, 1.5x3m
4mm 0.6x1.2, 0.75x1.5, 1.2x2.4m, 1.5x3m
5mm 0.6x1.2, 0.75x1.5, 1.2x2.4m, 1.5x3m
6mm 0.6x1.2, 0.75x1.5, 1.2x2.4m, 1.5x3m
8mm 0.6x1.2, 0.75x1.5, 1.2x2.4m, 1.5x3m
10mm 0.6x1.2, 0.75x1.5, 1.2x2.4m, 1.5x3m
12mm 1.2x2.4m, 1.5x3m
16mm 1.5x3m
20mm 1.5x3m

Mild Steel G350:
3mm 1.5x3m
4mm 1.5x3m
5mm 1.5x3m
6mm 1.5x3m
8mm 1.5x3m
10mm 1.5x3m
12mm 1.5x3m
16mm 1.5x3m
20mm 1.5x3m

Mild Steel Treadplate:
2.1mm 1.2x2.4m
3mm 1.2x2.4m, 1.2x3m
5mm 1.2x2.4m, 1.5x3m

Zincanneal:
0.95mm 1.2x2.4m
1.15mm 1.2x2.4m
1.55mm 1.2x2.4m
2mm 1.2x2.4m

Electrogalv 16/16:
1.55mm 1.5x3m

Galv:
0.55mm 1.2x2.4m
0.75mm 1.2x2.4m
0.95mm 1.2x2.4m
1.15mm 1.2x2.4m
1.5-1.6mm 1.2x2.4m, 1.5x3m
1.9-2mm 1.2x2.4m, 1.5x3m
2.9mm 1.2x2.4m

Corten/Redcor or similar weathering steel:
1.6mm 1.2x2.4m 
3mm 1.2x2.4m, 1.2x3m
5mm 1.5x3m

Aluminium:
Flat 5005 grade:
1.6mm 0.6x1.2, 0.75x1.5, 1.2x2.4m, 1.5x3m
2mm 0.6x1.2, 0.75x1.5, 1.2x2.4m, 1.5x3m
2.5mm 1.2x2.4m
3mm 0.6x1.2, 0.75x1.5, 1.2x2.4m, 1.5x3m 
4mm 0.6x1.2, 0.75x1.5, 1.2x2.4m, 1.5x3m
5mm 0.6x1.2, 0.75x1.5, 1.2x2.4m, 1.5x3m
6mm 0.6x1.2, 1.2x2.4m

Flat 5083 grade:
8mm 0.6x1.2, 0.75x1.5, 1.2x2.4m
10mm 0.6x1.2, 0.75x1.5, 1.2x2.4m
12mm 0.6x1.2, 0.75x1.5

5-Bar 5052 treadplate:
1.6mm 1.2x2.4m, 1.5x3m
2mm 1.2x2.4m
3mm 1.2x2.4m, 1.5x3m
4mm 1.2x2.4m
5mm 1.2x2.4m
6mm 1.2x2.4m

Stainless:
1b is plain mill finish with no film. Has a little rougher surface than 2b.
2b is plain/satin finish with film on
No4 is brushed finish with film on
No8 is mirror finish with film on

304 Stainless:
0.9mm 1.2x2.4m No4
1.2mm 1.2x2.4m, 1.2x3m No4
1.5 mm 1.2x2.4m No4, No8
2mm 1.2x2.4m 2b, No4, No8
3mm 1.2x2.4m 2b, No4, No8
5mm 1.2x2.4m 2b
6mm 1.2x2.4m 2b
8mm 1.2x2.4m 1b
10mm 1.2x2.4m 1b

Stainless 316:
1.2mm 1.2x2.4m No4, No8
1.5/1.6mm 1.2x2.4m 2b
2mm 1.2x2.4m 2b
3mm 1.2x2.4m 2b, No8
4mm 1.2x2.4m 2b
5mm 1.2x2.4m 2b
6mm 1.2x2.4m 2b
8mm 1.2x2.4m 1b
10mm 1.2x2.4m 1b

Special stainless 304/316:
Very limited partial sheet stock of the following
1.2mm 304 5wl textured pattern sheet 1.2x2.5m
Perforated sheets

Bis 80 or similar:
12 and 16mm grade 80 plate for laser cutting

Wear plates:
We do not stock wear plates

Excluding aluminium and 1.5x3m sheets of stainless, most sheets will be slightly bigger than noted size. Thicknesses my vary, typically within 0.1mm. If exact size is critical for your application, check with us before buying.